Product Description
XSC(L) series deep(water) well drilling rig uses full hydraulic
control, and the Top drive to drive the rotation of drilling tools
with very high drilling efficiency.
Reasonable overall layout uses the tractor-mounted or full ground
chassis for transportation with good maneuverability.
Very flexible in difficult roads and can be widely used in many
fields such as resource exploration of hydrology wells, coalbed
methane, shallow layer of shale gas, terrestrial heat, etc, and can
also be used for coal-mine gas exploitationor salvage work.
The top-mounted driving head principal shaft has a great drift
diameter, suitable for many kinds of construction work such as
slurry drilling, air drilling, and air foam drilling, meeting the
demands for well-drilling at different terrain strata.
Specifications:
| Parameter | | | XSL5/260 |
| Drilling capability | Drilling depth | m | 500( Ø89) |
| Max. diameter of work floor | mm | 400 |
| Feeding system | Max. lifting capacity | kN | 260 |
| Max. feeding capacity | kN | 100 |
| Max. lifting speed | m/m in | 25 |
| Max. feeding speed | m/m in | 36 |
| Stroke | mm | 5000 |
| Top drive | Max.torque | N • m | 9200 |
| Speed | r/min | 0-130 |
| I.D | mm | 55 |
| Floating distance | mm | 70 |
| Max. tilting angle | o | / |
| Deck engine | Type | | CUMINS 6BTAA5.9-C150 |
| Rated power | kW | 112 |
| Tool winch | Hoisting capacity | kN | 15 |
| Max. speed | m/m in | 30 |
| Breakout device | Max. breakout torque | N • m | 25000 |
| Vise clamping range | mm | Customized |
| Mud pump | Max. flow | L/min | / |
| Max. pressure | Mpa | / |
| Foam pump | Rate of flow | L/min | / |
| Rated pressure | Mpa | / |
| Mud pipe | Internal diameter | mm | 55 |
| Pressure | Mpa | 15 |
| Chassis | Drive mode | | Crawler chassis |
| Engine type | | / |
| Rated power | kW | / |
| Highest speed | km/h | 2.5 |
| Max. climbing gradient | % | 45 |
| Working dimension | mm | 4500x2250x8500 |
| Transportation dimension | mm | 8500x2250x3000 |
| Weight | t | 11.5 |
